Difference between revisions of "NeuroMD SDK Manual"

From Neurotech Software Development Kit
Jump to: navigation, search
(Preparation of a wireless sensor "Callibri" to work)
(Quickstart)
 
(150 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
This section contains information about software development kit required for using NeuroMD devices in user applications.
 +
 
=Introduction=
 
=Introduction=
 +
NeuroSDK as a part of Callibri and Brainbit products is a set of libraries for different operating systems and platforms providing full set of tools needed for configuring and receiving data from Callibri and Brainbit devices. This software development kit consists of portable core written on C++11/14 and a set of wrappers for different languages and platforms: Java for Android operating system, Objective-C++ for iOS/MacOS, C# for Windows, Python for different platforms. Also, the core could be used for making cross-platform applications in C++ using different compilers and IDEs.
 +
 +
NeuroSDK is intended to be used by developers of different systems which requires biopotential data in conjunction with information about body movements and respiratory activity. NeuroSDK also provides tools for electrostimulation using Callibri EMS device.
 +
 +
=Quickstart=
 +
To get started with software development kit you need to go through several steps which could vary in details for different platforms, but the essential sequence is constant. You may download and run some [https://github.com/NeuroMD/samples samples] to get started.
 +
===Download and link===
 +
First of all download actual libraries for your platform and link them to your project. You could find detailed tutorial for each plantform on page [[Binaries and downloads]]. SDK limitations and features for BLE device communications on different platforms are also described there. Once you've downloaded and linked binaries to your project you may start using NeuroMD SDK classes to work with Callibri and Brainbit devices.
 +
===Scan for devices===
 +
To find devices you need to cteate [[DeviceScanner]] object, subscribe DeviceFound event and call startScan method. Using Java for Android you should pass application [https://developer.android.com/reference/android/content/Context Context] object to its constructor (see "Java" tab). If you're making your application using C++ you should call factory method [[createDeviceScanner]] to get scanner object.
 +
<tabs>
 +
<tab name="C++">
 +
<syntaxhighlight lang="C++">
 +
#include "device_scanner/scanner_factory.h"
 +
#include "device/param_values.h"
 +
 +
int main(int argc, char *argv[]) {
 +
    auto scanner = Neuro::createDeviceScanner();
 +
    scanner->subscribeDeviceFound([](auto&& device_ptr){
 +
        onDeviceFound(std::forward<decltype(device_ptr)>(device_ptr));
 +
    });
 +
    scanner->startScan(0);//zero timeout for infinity
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
 +
<tab name="C">
 +
<syntaxhighlight lang="C">
 +
#include "cscanner.h"
 +
#include "cdevice.h"
 +
#include "cparams.h"
 +
#include "sdk_error.h"
 +
 +
int main(int argc, char* argv[]) {
 +
    DeviceScanner *scanner = create_device_scanner();
 +
    scanner_set_device_found_callback(scanner, &on_device_found);
 +
    scanner_start_scan(scanner, 0);//zero timeout for infinity
 +
    scanner_stop_scan(scanner);
 +
    scanner_delete(scanner);
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
 +
<tab name="C#">
 +
<syntaxhighlight lang="C#">
 +
var scanner = new DeviceScanner();
 +
scanner.DeviceFound += Scanner_DeviceFound;
 +
scanner.StartScan();
 +
</syntaxhighlight>
 +
</tab>
 +
 +
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
mScanner = new DeviceScanner(getApplicationContext());
 +
mScanner.deviceFound.subscribe(new INotificationCallback<Device>()
 +
{
 +
        @Override
 +
        public void onNotify(Object o, Device device)
 +
        {
 +
            //working with found device
 +
            onDeviceFound(device);
 +
        }
 +
});
 +
mScanner.startScan(0); //zero is for infinity
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
 +
 +
===Read device name and address and connect to it===
 +
Basicly you should read device parameters only if device is in "Connected" state, but parameters "Name", "Address" and "State" could be read on "Disconnected" device. To read params call '''readParam''' method passing appropriate [[ParamName (Java)|ParamName]] parameter to method in case of Java or with template parameter of type [[Parameter (C++)|Parameter]] in case of C++.
 +
 +
<tabs>
 +
<tab name="C++">
 +
<syntaxhighlight lang="C++">
 +
template <typename T>
 +
void onDeviceFound(T&& device_ptr){
 +
    auto deviceName = device_ptr->readParam<Neuro::Parameter::Name>();
 +
    auto deviceAddress = device_ptr->readParam<Neuro::Parameter::Address>();
 +
    auto deviceState = device_ptr->readParam<Neuro::Parameter::State>();
 +
 +
    using device_t = typename std::remove_reference_t<decltype(device_ptr)>::element_type;
 +
    auto sharedDevice = std::shared_ptr<device_t>(std::forward<T>(device_ptr));
 +
    if (deviceState != Neuro::DeviceState::Connected) {
 +
connectDevice(sharedDevice);
 +
    }
 +
}
 +
 +
template <typename T>
 +
void connectDevice(T&& device_ptr){
 +
    using device_t = typename std::remove_reference_t<decltype(device_ptr)>::element_type;
 +
    auto weakDevice = std::weak_ptr<device_t>(device_ptr);
 +
    device_ptr->setParamChangedCallback([weakDevice](auto param){
 +
        if (param == Parameter::State){
 +
            auto device = weakDevice.lock();
 +
            if (device != nullptr) {
 +
                auto state = device->readParam<Parameter::State>();
 +
                if (state == Neuro::DeviceState::Connected) {
 +
                    readDeviceFeatures(device);
 +
                }
 +
            }
 +
        }
 +
    });
 +
    device_ptr->connect();
 +
    FoundDevices.push_back(device_ptr);
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
 +
<tab name="C">
 +
<syntaxhighlight lang="C">
 +
void on_param_changed(Device *device, Parameter param) {
 +
    if (param == ParameterState) {
 +
        DeviceState state;
 +
        device_read_State(device, &state);
 +
        if (state == DeviceStateConnected) {
 +
            printf("Device connected");
 +
            on_device_connected(device);
 +
        }
 +
    }
 +
}
  
Wireless sensor "Callibri" is a multifunction device that can be used for:
+
void on_device_found(Device *device) {
 +
    char nameBuffer[128];
 +
    device_read_Name(device, nameBuffer, 128);
  
1) registration of various biopotentials (electromyograms, electrocardiograms, cardiointervalograms);
+
    DeviceState state;
 +
    device_read_State(device, &state);
  
2) for recording the angular velocity and acceleration (MEMS);
+
    char addressBuffer[64];
 +
    device_read_Address(device, addressBuffer, 64);
  
3) the formation of electrostimulating effects and correction of violations of the human muscular system.
+
    device_subscribe_param_changed(device, &on_param_changed);
 +
    if (state != DeviceStateConnected) {
 +
        device_connect(device);
 +
    }
 +
    else {
 +
        on_device_connected(device);
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
The principle of wireless communication is provided using the Bluetooth LE radio channel between the sensor and the device (mobile phone, etc.)
+
<tab name="C#">
The advantage of wireless registration is to minimize motor artifacts and, as a consequence, to ensure the free position of the subject's body, including the ability to move.
+
<syntaxhighlight lang="C#">
Based on the sensors "Callibri" with the use of SDK, you can create:
+
private static void Scanner_DeviceFound(object sender, Device device)
 +
{
 +
    (sender as DeviceScanner)?.StopScan();
 +
    device.ParameterChanged += Device_ParameterChanged;
 +
    var deviceName = device.ReadParam<string>(Parameter.Name);
 +
    var deviceAddress = device.ReadParam<string>(Parameter.Address);
 +
    var connectionState = device.ReadParam<DeviceState>(Parameter.State);
 +
    if (connectionState != DeviceState.Connected)
 +
    {
 +
        device.Connect();
 +
    }
 +
    else
 +
    {
 +
        OnDeviceConnected(device);
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
- neurointerfaces based on Biological feedback;
+
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
    private void onDeviceFound(final Device device)
 +
    {
 +
        String deviceName = device.readParam(ParameterName.Name);
 +
        String deviceAddress = device.readParam(ParameterName.Address);
 +
        device.parameterChanged.subscribe(new INotificationCallback<ParameterName>()
 +
        {
 +
            @Override
 +
            public void onNotify(Object o, ParameterName parameterName)
 +
            {
 +
                if (parameterName == ParameterName.State){
 +
                    DeviceState state = device.readParam(ParameterName.State);
 +
                    if (state == DeviceState.Connected){
 +
                        runOnUiThread(new Runnable()
 +
                        {
 +
                            @Override
 +
                            public void run()
 +
                            {
 +
                                onDeviceConnected(device);
 +
                            }
 +
                        });
 +
                    }
 +
                }
 +
            }
 +
        });
 +
        device.connect();
 +
    }
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
- a system for assessing the quality of training in fitness and sports;
+
===Explore device parameters, channels and commands===
 +
Now you could get information about device features: channels, commands and parameters. All communications with device modules are performed through these three substancies.
 +
<tabs>
 +
<tab name="C++">
 +
<syntaxhighlight lang="C++">
 +
template <typename T>
 +
void readDeviceFeatures(T&& device_ptr){
 +
    auto commands = device_ptr->commands();
 +
    for (auto& cmd : commands){
 +
        auto cmdName = Neuro::to_string(cmd);
 +
    }
  
- applications based on the registration of EMG, EEG, ECG (no more than 4 channels).
+
    auto params = device_ptr->parameters();
 +
    for (auto& paramPair : params){
 +
      auto paramName = Neuro::to_string(paramPair.first);
 +
      auto paramAccessMode = Neuro::to_string(paramPair.second);
 +
    }
  
To start develop your apps using Neurotech Callibri SDK read [[Developer guide]]
+
    auto channels = device_ptr->channels();
 +
    for (auto& channel : channels){
 +
      auto channelName = channel.getName();
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
==Signs used in this manual==
+
<tab name="C">
 +
<syntaxhighlight lang="C">
 +
void on_device_connected(Device* device) {
 +
    CommandArray commands;
 +
    if (device_available_commands(device, &commands) == SDK_NO_ERROR) {
 +
        printf("Device can execute:\n");
 +
        for (size_t i = 0; i < commands.cmd_array_size; ++i) {
 +
            Command cmd = commands.cmd_array[i];
 +
            char commandName[32];
 +
            command_to_string(cmd, commandName, 32);
 +
        }
 +
        free(commands.cmd_array);
 +
    }
  
[[File:1.png]] '''Warning''' - indicates situations or actions that are dangerous to the user;
+
    ParamInfoArray parameters;
 +
    if (device_available_parameters(device, &parameters) == SDK_NO_ERROR) {
 +
        printf("Device has parameters:\n");
 +
        for (size_t i = 0; i < parameters.info_count; ++i) {
 +
            ParameterInfo paramInfo = parameters.info_array[i];
 +
            char paramName[32];
 +
            parameter_to_string(paramInfo.parameter, paramName, 32);
 +
            char access[32];
 +
            parameter_access_to_string(paramInfo.access, access, 32);
 +
        }
 +
        free(parameters.info_array);
 +
    }
  
[[File:2.png]] '''Attention''' - indicates situations or actions that could lead to damage to the device / other equipment or its misuse;
+
    ChannelInfoArray channels;
 +
    if (device_available_channels(device, &channels) == SDK_NO_ERROR) {
 +
        printf("Device has channels:\n");
 +
        for (size_t i = 0; i < channels.info_count; ++i) {
 +
            ChannelInfo channelInfo = channels.info_array[i];
 +
        }
 +
        free(channels.info_array);
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
[[File:3.png]] '''Note''' - recomendation and additional information.
+
<tab name="C#">
 +
<syntaxhighlight lang="C#">
 +
private static void OnDeviceConnected(Device device)
 +
{
 +
    Console.WriteLine();
 +
    Console.WriteLine("Device can execute:");
 +
    foreach(var cmd in device.Commands)
 +
    {
 +
        Console.WriteLine($"    -{cmd.ToString()}");
 +
    }
 +
    Console.WriteLine();
  
==Appearance of the sensor "Callibri"==
+
    Console.WriteLine("Device has parameters:");
 +
    foreach (var paraminfo in device.Parameters)
 +
    {
 +
        Console.WriteLine($"    -{paraminfo.Parameter} {{{paraminfo.Access}}}");
 +
    }
 +
    Console.WriteLine();
 +
   
 +
    Console.WriteLine("Device has channels:");
 +
    foreach (var channel in device.Channels)
 +
    {
 +
                Console.WriteLine($"    -{channel.Name}");
 +
    }
 +
    Console.WriteLine();
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
 +
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
    private void onDeviceConnected(Device device)
 +
    {
 +
        Parameter[] deviceParams = device.parameters();
 +
        for (Parameter param : deviceParams)
 +
        {
 +
            String paramName = param.getName().toString();
 +
            String accessMode = param.getAccess().toString();
 +
        }
 +
   
 +
        Command[] deviceCommands = device.commands();
 +
        for (Command cmd : deviceCommands)
 +
        {
 +
            String cmdName = cmd.toString();
 +
        }
 +
   
 +
        ChannelInfo[] deviceChannels = device.channels();
 +
        for (ChannelInfo channel : deviceChannels)
 +
        {
 +
            String channelName = channel.getName();
 +
        }
  
'''1. Power button''' [[File:4.png|thumb|right|sensor "Callibri"]]
+
        subscribeBatteryLevel(device);
 +
    }
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
'''2. Red indicator'''
+
===Acquiring signal data, battery charge etc.===
  
'''3. Green indicator'''
+
All devices provides information through various channels. For example, to obtain information about signal use [[#SignalChannel|Signal Channel]] class. It requires [[Device]] object as constructor parameter
  
'''4. Cutout in the sensor for tape attachment'''
+
=[[Device|Device abstraction]]=
 +
Every physical device, Callibri or Brainbit, is represented in NeuroSDK as Device abstraction which has state and set of possible control actions. Device state (should not be confused with connection state - one of device parameters) is characterized by parameters of device , which could be read with special function call '''''readParam'''''. Control actions are presented as set of possible commands and set of writable parameters. Commands could be executed by '''''execute''''' function, parameters could be set with '''''setParam''''' function. Device also has separate functions to control connection state. You can get list of all supported parameters by calling '''''parameters''''' member function. To get list of supported commands call '''''commands''''' member function. More information about these functions available on appropriate [[Device|Device pages]] for different languages.
 +
<tabs>
 +
<tab name="C++">
 +
<syntaxhighlight lang="C++">
 +
namespace Neuro {
  
'''5. Contact areas'''
+
class Device final {
 +
private:
 +
    std::unique_ptr<DeviceImpl> mImpl;
  
'''6. USB connector for the charger'''
+
public:
 +
    ~Device();
  
==Start and finish of work==
+
    void connect();
 +
    void disconnect();
 +
    std::vector<ChannelInfo> channels() const;
 +
    std::vector<Command> commands() const;
 +
    std::vector<ParamPair> parameters() const;
 +
    bool execute(Command);
 +
    void setParamChangedCallback(std::function<void(Parameter)>);
  
Press the power button for turning on /off the sensor (1).
+
    template <Parameter P>
 +
    typename ParamValue<P>::Type readParam() const;
  
==Charging==
+
    template <Parameter P>
 +
    bool setParam(typename ParamValue<P>::Type value);
  
For charge the sensor, align the sensor's USB connector (6) with the USB cable of the charger. Connect to power supply.
+
private:
 +
    Device(std::unique_ptr<DeviceImpl>);
 +
};
  
[[File:5.png]]
+
bool checkHasChannel(const Device &, const ChannelInfo &);
 +
bool checkHasCommand(const Device &, Command);
 +
bool checkHasParameter(const Device &, Parameter);
 +
std::size_t countChannelsWithType(const Device &, ChannelInfo::Type);
 +
ParamAccess getParameterAccess(const Device &, Parameter);
  
<big>'''WARNING! DO NOT USE THE SENSOR DURING HIS CHARGE'''</big>
+
}
 +
</syntaxhighlight>
 +
</tab>
  
[[File:1.png]] Use only chargers with appropriate specifications. Use of inappropriate chargers may result to the battery explosion or sensor damage.
+
<tab name="C">
 +
<syntaxhighlight lang="C">
 +
typedef struct _Device Device;
  
[[File:2.png]] Charge the battery before using the "Callibri" registration module for the first time!
+
int device_connect(Device *);
 +
int device_disconnect(Device *);
 +
void device_delete(Device *);
 +
int device_available_channels(const Device *, ChannelInfoArray *);
 +
int device_available_commands(const Device *, CommandArray *);
 +
int device_available_parameters(const Device *, ParamInfoArray *);
 +
int device_execute(Device *, Command);
 +
int device_subscribe_param_changed(Device*, void(*)(Device*, Parameter));
 +
</syntaxhighlight>
 +
</tab>
  
[[File:2.png]] Charging of the registration module is ONLY when it is turned off! Otherwise, there is a probability that the "Callibri" sensor will fail.
+
<tab name="C#">
Do not use a personal computer to charge the "Callibri" sensor!
+
<syntaxhighlight lang="C#">
 +
namespace Neuro
 +
{
 +
    public class Device
 +
    {
 +
        public event EventHandler<Parameter> ParameterChanged;
  
[[File:2.png]] Can not keep the registration module in a discharged state!
+
        public IEnumerable<ChannelInfo> Channels { get; }
 +
        public IEnumerable<Command> Commands { get; }
 +
        public IEnumerable<ParamInfo> Parameters { get; }
  
[[File:3.png]] The duration of the full charge of the battery is no more than 4 hours.
+
        public void Connect()
 +
        {
 +
            SdkError.ThrowIfError(device_connect(DevicePtr));
 +
        }
  
 +
        public void Disconnect();
 +
        public void Execute(Command command);
 +
        public T ReadParam<T>(Parameter parameter);
 +
        public void SetParam<T>(Parameter parameter, T value);
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
==Indication of sensor "Callibri"==
+
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
public class Device {
 +
    public final SubscribersNotifier<ParameterName> parameterChanged;
  
On body of the sensor "Callibri" there are two indicators of green and red colors. The color indication depends on the operating mode of the sensor.
+
    public native void connect();
 +
    public native void disconnect();
 +
    public native ChannelInfo[] channels();
 +
    public native Command[] commands();
 +
    public native Parameter[] parameters();
 +
    public native boolean execute(Command cmd);
 +
    public native <ParamType> ParamType readParam(ParameterName param);
 +
    public native boolean setParam(ParameterName param, Object value);
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
 +
==Device commands==
 +
Whole list of device commands consists of:
 +
::1. StartSignal command
 +
::2. StopSignal command
 +
::3. StartResist command
 +
::4. StopResist command
 +
::5. StartMEMS command
 +
::6. StopMEMS command
 +
::7. StartRespiration command
 +
::8. StopRespiration command
 +
::9. StartStimulation command
 +
::10. EnableMotionAssistant command
 +
::11. FindMe command
  
[[File:a.png]] - LEDs do not light up - the registration module "Callibri" is disabled;
+
==Device parameters==
 +
Set of command for specific device depends on which modules does device have. This is also true for parameters set. All possible parameters are listed below:
 +
::1. Name,
 +
::2. State,
 +
::3. Address,
 +
::4. SerialNumber,
 +
::5. HardwareFilterState,
 +
::6. FirmwareMode,
 +
::7. SamplingFrequency,
 +
::8. Gain,
 +
::9. Offset,
 +
::10. ExternalSwitchState,
 +
::11. ADCInputState,
 +
::12. AccelerometerSens,
 +
::13. GyroscopeSens,
 +
::14. StimulatorState,
 +
::15. MotionAssistantState,
 +
::16. StimulatorParamPack,
 +
::17. MotionAssistantParamPack
  
[[File:b.png]] - The LED on the left is green - the "Callibri" registration module is on;
+
Device could be configured by setting these parameters, but whether each parameter could be set or not is represented by parameter access modifier:
 +
::1. Read,
 +
::2. ReadWrite,
 +
::3. ReadNotify
  
[[File:c.png]] - The LED left blinks in green - the process of charging the battery of the "Callibri" registration module is in progress;
+
Parameters could be readonly, for some of them device provides notification mechanism. Parameters with ReadWrite notifier could be set from user code.
  
[[File:d.png]] - The right LED is lit in red - the battery charge of the "Callibri" registration module is less than 5%;
+
=Channel library=
 +
All NeuroMD devices provides biopotential signals and telemetry information through channels. Channel set of device depends on device modules. Information about channels could be obtained by calling '''channels''' method of device class.
 +
 +
===[[SignalChannel]]===
  
[[File:e.png]] - The right LED flashes red - the battery charge of the "Callibri" registration module is less than 1%;
+
Built-in channel wich provides access to signal data received from device
  
[[File:f.png]] - LED left and right alternately flash green and red colors - the registration module "Callibri" is fully charged.
+
<tabs>
 +
<tab name="C#">
 +
<syntaxhighlight lang='c#' line='line'>
 +
private static void OnDeviceConnected(Device device)
 +
{
 +
    var frequency = device.ReadParam<SamplingFrequency>(Parameter.SamplingFrequency);
 +
    if (frequency != SamplingFrequency.Hz125)
 +
    {
 +
        device.SetParam(Parameter.SamplingFrequency, SamplingFrequency.Hz125);
 +
    }
 +
    var signalChannel = new SignalChannel(device);
 +
    signalChannel.LengthChanged += SignalChannel_LengthChanged;
 +
    device.Execute(Command.StartSignal);
 +
}
  
 +
private static void SignalChannel_LengthChanged(object sender, int length)
 +
{
 +
    var duration = (double) (length) / 125;
 +
    if (length > 125)
 +
    {
 +
        var data = (sender as SignalChannel)?.ReadData(length - 125, 125);//read last second of signal on 125 Hz sampling frequency
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
==Product using==
+
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
private void createSignalChannel(Device device){
 +
    ChannelInfo[] deviceChannels = device.channels();
 +
    for (ChannelInfo info : deviceChannels) { //creating spectrum channels for each signal channel present in device
 +
        if (info.getType() == ChannelType.Signal) {
 +
            final SignalChannel signalChannel = new SignalChannel(device, info);
 +
            signalChannel.dataLengthChanged.subscribe(new INotificationCallback<Long>() {
 +
                @Override
 +
                  public void onNotify(Object sender, Long length) {
 +
                      long dataLength = 1024;
 +
                      if (length > dataLength){
 +
                          double[] signalData = signalChannel.readFast(length - dataLength, dataLength); //read last 1024 signal samples
 +
                      }
 +
                  }
 +
            });
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
Wireless sensor "Callibri" can be used to:
+
===[[BatteryChannel]]===
 +
 +
Built-in channel containing battery charge data
 +
<tabs>
 +
<tab name="C#">
 +
<syntaxhighlight lang='c#' line='line'>
 +
private static void OnDeviceConnected(Device device)
 +
{   
 +
      var batteryChannel = new BatteryChannel(device);
 +
      batteryChannel.LengthChanged += BatteryChannel_LengthChanged;
 +
}
  
1) diagnosis;
+
private static void BatteryChannel_LengthChanged(object sender, int length)
 +
{
 +
      var batteryLevel = (sender as BatteryChannel)?.ReadData(length - 1, 1)[0] ?? 0;
 +
}
 +
</syntaxhighlight>
 +
</tab>
  
2) electrostimulation / correction.
+
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
private void subscribeBatteryLevel(Device device){
 +
    final BatteryChannel batteryChannel = new BatteryChannel(device);
 +
    batteryChannel.dataLengthChanged.subscribe(new INotificationCallback<Long>() {
 +
      @Override
 +
      public void onNotify(Object sender, Long length) {
 +
            int batteryLevel = batteryChannel.readData(length - 1, 1)[0];
 +
      }
 +
    });
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
<big>'''WARNING! WHEN USING THE SENSOR IN ELECTRIC MODULATION / CORRECTION MODE, FOLLOW THE SAFETY REQUIREMENTS WHEN USING THE DEVICE!'''</big>
+
===[[ConnectionStatsChannel]]===
 +
 
 +
===[[ElectrodesStateChannel]]===
 +
 +
===[[MEMSChannel]]===
 +
 +
===[[OrientationChannel]]===
 +
 +
===[[RespirationChannel]]===
 +
 +
===[[SpectrumChannel]]===
 +
 +
Programm channel providing spectrum data for specified signal channel
 +
<tabs>
 +
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
private void createSpectrumChannel(Device device){
 +
    ChannelInfo[] deviceChannels = device.channels();
 +
    for (ChannelInfo info : deviceChannels) { //creating spectrum channels for each signal channel present in device
 +
        if (info.getType() == ChannelType.Signal) {
 +
            SignalChannel signalChannel = new SignalChannel(device, info);
 +
            final SpectrumChannel spectrumChannel = new SpectrumChannel(signalChannel);
 +
            spectrumChannel.dataLengthChanged.subscribe(new INotificationCallback<Long>() {
 +
                @Override
 +
                  public void onNotify(Object sender, Long length) {
 +
                      long dataRangeLength = 1024;
 +
                      if (length > dataRangeLength){
 +
                          double[] spectrumData = spectrumChannel.readFast(length - dataRangeLength, dataRangeLength); //calculating spectrum for last 1024 signal samples
 +
                      }
 +
                  }
 +
            });
 +
    }
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
For the wireless sensor "Callibri in the mode of electrostimulation / correction:
+
==Base channel==
 +
All channel classes which device has are inherited from '''[[BaseChannel]]''' abstract class/interface. Custom channels (channels which do not present in device, also user-created) could be inherited from '''[[BaseChannel]]''', but it is not necessary. Representing device information by channels gives easy way to process heterogeneous information in one manner. For example, it is easy to plot function of battery charge, biosignal, and connection statistics depend on same time scale.
  
1) Contraindications:
+
<tabs>
 +
<tab name="C++">
 +
<syntaxhighlight lang='c++' line='line'>
 +
namespace Neuro {
  
1.1 individual intolerance to electric current;
+
template <typename DataType>
 +
class BaseChannel {
 +
public:
 +
    using data_container = std::vector<DataType>;
 +
    using length_callback_t = std::function<void(data_length_t)>;
 +
    using length_listener_ptr = ListenerPtr<void, data_length_t>;
  
1.2 damage to the integrity of the skin (wounds, abrasions, ulcers);
+
    BaseChannel(ChannelInfo &&info) noexcept : mInfo(std::move(info)) {}
 +
    BaseChannel(const ChannelInfo &info) : mInfo(info) {}
 +
    virtual ~BaseChannel() = default;
  
1.3 Built-in pacemaker, neurostimulator or any other electronic device;
+
    ChannelInfo& info() noexcept {
 +
        return mInfo;
 +
    }
  
1.4 with caution in the presence of the patient epileptic seizures. Only with the permission of the attending physician!
+
    virtual length_listener_ptr subscribeLengthChanged(length_callback_t callback) noexcept = 0;
 +
    virtual data_container readData(data_offset_t, data_length_t) const = 0;
 +
    virtual data_length_t totalLength() const noexcept = 0;
 +
    virtual data_length_t bufferSize() const noexcept = 0;
 +
    virtual sampling_frequency_t samplingFrequency() const noexcept = 0;
 +
    virtual void setSamplingFrequency(sampling_frequency_t) = 0;
 +
    virtual std::weak_ptr<Device> underlyingDevice() const noexcept = 0;
  
1.5 heart disease. Only after consulting a doctor;
+
protected:
 +
    ChannelInfo mInfo;
 +
};
  
1.6 serious violations of the arterial blood circulation in the lower extremities.
+
}
 +
</syntaxhighlight>
 +
</tab>
  
2) Not recommended:
+
<tab name="Java">
 +
<syntaxhighlight lang='java' line='line'>
 +
public abstract class BaseChannel<SampleType> {
 +
    public final SubscribersNotifier<Long> dataLengthChanged = new SubscribersNotifier<>();
 +
    public abstract ChannelInfo info();
 +
    public abstract SampleType[] readData(long offset, long length);
 +
    public abstract long totalLength();
 +
    public abstract long bufferSize();
 +
    public abstract float samplingFrequency();
 +
    public abstract void setSamplingFrequency(float frequency);
 +
    public abstract Device underlyingDevice();
 +
}
 +
</syntaxhighlight>
 +
</tab>
 +
</tabs>
  
2.1) for prolonged electrostimulation (more than 30 minutes);
+
=Devices versions=
 +
Callibri and Brainbit devices could have different sets of modules and functions depend on purpose of specific device.  
  
2.2.) Use the appliance by pregnant women.
+
Currently NeuroSDK supports three types of devices:
 +
:• Callibri (for electrophysiology);
 +
:• Callibri EMS;
 +
:• Brainbit.
  
3) Prohibited:
+
In this section all possible compositions of modules or functions are listed
 +
==Callibri==
 +
Since Callibri device is positioned as universal biopotential measuring device it has modules to provide as much information as possible.
  
3.1) use the product near the head. There is no evidence of the effects of brain stimulation;
+
All posible modules of Callibri device are:
 +
====Base Callibri module====
 +
Base module is responsible for common Callibri device configuration and BLE configuration.
  
3.2) use the product to stimulate the neck. Possible consequences in the form of severe muscle spasms and closure of the airways;
+
Module parameters:
  
3.3) perform stimulation on the chest. Possible consequences in the form of a violation of the rhythm of the heart.
+
::1. Name;
 +
::2. State;
 +
::3. Address;
 +
::4. SerialNumber;
 +
::5. FirmwareMode;
  
 +
====Signal module====
 +
This module controls wide range of bio signals acquisition and its parameters such as sampling frequency, gain etc.
  
==Preparation of a wireless sensor "Callibri" to work==
+
Module parameters:
  
===For work with the "Callibri complex you need:===
+
::1. HardwareFilterState;
 +
::2. SamplingFrequency;
 +
::3. Gain;
 +
::4. Offset;
 +
::5. ExternalSwitchState;
 +
::6. ADCInputState;
  
1) enable the Bluetooth module on the mobile device;
+
====Respiration module====
 +
Respiration module controls special signal acquisition - respiration characteristic.
  
2) turn on the registration module "Callibri" by touching and holding the button for two seconds;
+
Module parameters:
  
3) if you want use the diagnostic mode:
+
::1. ExternalSwitchState;
  
3.1) install disposable electrodes on the "Callibri" registration module;
+
====Micro electro-mechanical system (MEMS) module====
 +
This module is responsible for orientation and acceleration tracking of device.
  
3.2) remove the protective layer from the electrodes;
+
Module parameters:
  
3.3) install the electrodes:
+
::1. AccelerometerSens;
 +
::2. GyroscopeSens.
  
• abdominal muscles (for EMG);
+
Most commonly Callibri device are supplied with all of these modules.
 +
Modules could be configured through device parameters. It is also possible to execute set of module-specific commands. List of supported commands and parameters could be acquired from device by appropriate calls to device library.
  
• on the non-haired part of the head (frontal bone) (for EEG);
+
==Callibri EMS==
  
• the area of ​​the projection of the heart on the patient's chest (for HRV).
+
Callibri EMS device is positioned as smart electromyostimulation device and provides ability to stimulate muscles based on orientation and acceleration tracking data. It includes:
 +
====Base Callibri module====
 +
Base module is responsible for common Callibri device configuration and BLE configuration.
  
3.4) after finishing pick up of the signals, remove the electrodes from the body;
+
Module parameters:
  
3.6) turn off the registration module.
+
::1. Name;
 +
::2. State;
 +
::3. Address;
 +
::4. SerialNumber;
 +
::5. FirmwareMode;
  
4) if you want use the electro-stimulation / correction mode:
+
====Micro electro-mechanical system (MEMS) module====
 +
This module is responsible for orientation and acceleration tracking of device.
  
4.1) put the cuff on the limb (upper / lower);
+
Module parameters:
  
4.2) place the registration module "Callibri" in the pocket on the cuff;
+
::1. AccelerometerSens;
 +
::2. GyroscopeSens;
  
4.3) connect the cable to the registration module "Callibri" on the connectors (red and blue), install disposable electrodes;
+
====Stimulation module====
 +
Special module for Callibri EMS which provides output with stimulation current pulses for miostimulation.
  
4.4) remove the protective layer from the electrodes;
+
Module parameters:
  
4.5) place the electrodes on the abdomen of the necessary muscle;
+
::1. StimulatorState;
 +
::2. MotionAssistantState;
 +
::3. StimulatorParamPack;
 +
::4. MotionAssistantParamPack.
  
4.6) perform stimulation / correction;
+
==Brainbit==
 +
Brainbit is more simplier than Callibri device and has only two modules
 +
====Base Brainbit module====
 +
Base module is responsible for connection establishing through BLE and for device state and mode control.
  
4.7) remove electrodes from the body;
+
Module parameters:
  
4.8) disconnect the cable from the electrodes and the registration module;
+
::1. Name;
 +
::2. State;
 +
::3. Address;
  
4.9) remove the registration module from the pocket on the cuff and turn it off;
+
====Signal module====
 +
Signal module is responsible for acquisition of EEG signal from 4 device electrodes and for measuring electrodes resistance.
  
4.10) remove the cuff.
+
Module parameters:
  
5) Utilize the disposable electrodes by a standard method;
+
::1. SamplingFrequency;
 +
::2. Gain;
 +
::3. Offset;
  
6) Disinfect the registration module with a tissue moistened with a 3% hydrogen peroxide solution, with the addition of a synthetic detergent.
+
There are no modifications for Brainbit device, so basically it has fixed set of commands and parameters. Anyway, we are moving forward and add new post analytic functions for Brainbit data.

Latest revision as of 04:53, 22 August 2018

This section contains information about software development kit required for using NeuroMD devices in user applications.

Introduction

NeuroSDK as a part of Callibri and Brainbit products is a set of libraries for different operating systems and platforms providing full set of tools needed for configuring and receiving data from Callibri and Brainbit devices. This software development kit consists of portable core written on C++11/14 and a set of wrappers for different languages and platforms: Java for Android operating system, Objective-C++ for iOS/MacOS, C# for Windows, Python for different platforms. Also, the core could be used for making cross-platform applications in C++ using different compilers and IDEs.

NeuroSDK is intended to be used by developers of different systems which requires biopotential data in conjunction with information about body movements and respiratory activity. NeuroSDK also provides tools for electrostimulation using Callibri EMS device.

Quickstart

To get started with software development kit you need to go through several steps which could vary in details for different platforms, but the essential sequence is constant. You may download and run some samples to get started.

Download and link

First of all download actual libraries for your platform and link them to your project. You could find detailed tutorial for each plantform on page Binaries and downloads. SDK limitations and features for BLE device communications on different platforms are also described there. Once you've downloaded and linked binaries to your project you may start using NeuroMD SDK classes to work with Callibri and Brainbit devices.

Scan for devices

To find devices you need to cteate DeviceScanner object, subscribe DeviceFound event and call startScan method. Using Java for Android you should pass application Context object to its constructor (see "Java" tab). If you're making your application using C++ you should call factory method createDeviceScanner to get scanner object.

#include "device_scanner/scanner_factory.h"
#include "device/param_values.h"

int main(int argc, char *argv[]) {
    auto scanner = Neuro::createDeviceScanner();
    scanner->subscribeDeviceFound([](auto&& device_ptr){
        onDeviceFound(std::forward<decltype(device_ptr)>(device_ptr));
    });
    scanner->startScan(0);//zero timeout for infinity
}
#include "cscanner.h"
#include "cdevice.h"
#include "cparams.h"
#include "sdk_error.h"

int main(int argc, char* argv[]) {
    DeviceScanner *scanner = create_device_scanner();
    scanner_set_device_found_callback(scanner, &on_device_found);
    scanner_start_scan(scanner, 0);//zero timeout for infinity
    scanner_stop_scan(scanner);
    scanner_delete(scanner);
}
var scanner = new DeviceScanner();
scanner.DeviceFound += Scanner_DeviceFound;
scanner.StartScan();
mScanner = new DeviceScanner(getApplicationContext());
mScanner.deviceFound.subscribe(new INotificationCallback<Device>()
{
        @Override
        public void onNotify(Object o, Device device)
        {
            //working with found device
            onDeviceFound(device);
        }
});
mScanner.startScan(0); //zero is for infinity

Read device name and address and connect to it

Basicly you should read device parameters only if device is in "Connected" state, but parameters "Name", "Address" and "State" could be read on "Disconnected" device. To read params call readParam method passing appropriate ParamName parameter to method in case of Java or with template parameter of type Parameter in case of C++.

template <typename T>
void onDeviceFound(T&& device_ptr){
    auto deviceName = device_ptr->readParam<Neuro::Parameter::Name>();
    auto deviceAddress = device_ptr->readParam<Neuro::Parameter::Address>();
    auto deviceState = device_ptr->readParam<Neuro::Parameter::State>();

    using device_t = typename std::remove_reference_t<decltype(device_ptr)>::element_type;
    auto sharedDevice = std::shared_ptr<device_t>(std::forward<T>(device_ptr));
    if (deviceState != Neuro::DeviceState::Connected) {
		connectDevice(sharedDevice);
    }
}

template <typename T>
void connectDevice(T&& device_ptr){
    using device_t = typename std::remove_reference_t<decltype(device_ptr)>::element_type;
    auto weakDevice = std::weak_ptr<device_t>(device_ptr);
    device_ptr->setParamChangedCallback([weakDevice](auto param){
        if (param == Parameter::State){
            auto device = weakDevice.lock();
            if (device != nullptr) {
                auto state = device->readParam<Parameter::State>();
                if (state == Neuro::DeviceState::Connected) {
                    readDeviceFeatures(device);
                }
            }
        }
    });
    device_ptr->connect();
    FoundDevices.push_back(device_ptr);
}
void on_param_changed(Device *device, Parameter param) {
    if (param == ParameterState) {
        DeviceState state;
        device_read_State(device, &state);
        if (state == DeviceStateConnected) {
            printf("Device connected");
            on_device_connected(device);
        }
    }
}

void on_device_found(Device *device) {
    char nameBuffer[128];
    device_read_Name(device, nameBuffer, 128);

    DeviceState state;
    device_read_State(device, &state);

    char addressBuffer[64];
    device_read_Address(device, addressBuffer, 64);

    device_subscribe_param_changed(device, &on_param_changed);
    if (state != DeviceStateConnected) {
        device_connect(device);
    }
    else {
        on_device_connected(device);
    }
}
private static void Scanner_DeviceFound(object sender, Device device)
{
    (sender as DeviceScanner)?.StopScan();
    device.ParameterChanged += Device_ParameterChanged;
    var deviceName = device.ReadParam<string>(Parameter.Name);
    var deviceAddress = device.ReadParam<string>(Parameter.Address);
    var connectionState = device.ReadParam<DeviceState>(Parameter.State);
    if (connectionState != DeviceState.Connected)
    {
        device.Connect();
    }
    else
    {
        OnDeviceConnected(device);
    }
}
    private void onDeviceFound(final Device device)
    {
        String deviceName = device.readParam(ParameterName.Name);
        String deviceAddress = device.readParam(ParameterName.Address);
        device.parameterChanged.subscribe(new INotificationCallback<ParameterName>()
        {
            @Override
            public void onNotify(Object o, ParameterName parameterName)
            {
                if (parameterName == ParameterName.State){
                    DeviceState state = device.readParam(ParameterName.State);
                    if (state == DeviceState.Connected){
                        runOnUiThread(new Runnable()
                        {
                            @Override
                            public void run()
                            {
                                onDeviceConnected(device);
                            }
                        });
                    }
                }
            }
        });
        device.connect();
    }

Explore device parameters, channels and commands

Now you could get information about device features: channels, commands and parameters. All communications with device modules are performed through these three substancies.

template <typename T>
void readDeviceFeatures(T&& device_ptr){
    auto commands = device_ptr->commands();
    for (auto& cmd : commands){
        auto cmdName = Neuro::to_string(cmd);
    }

    auto params = device_ptr->parameters();
    for (auto& paramPair : params){
       auto paramName = Neuro::to_string(paramPair.first);
       auto paramAccessMode = Neuro::to_string(paramPair.second);
    }

    auto channels = device_ptr->channels();
    for (auto& channel : channels){
       auto channelName = channel.getName();
    }
}
void on_device_connected(Device* device) {
    CommandArray commands;
    if (device_available_commands(device, &commands) == SDK_NO_ERROR) {
        printf("Device can execute:\n");
        for (size_t i = 0; i < commands.cmd_array_size; ++i) {
            Command cmd = commands.cmd_array[i];
            char commandName[32];
            command_to_string(cmd, commandName, 32);
        }
        free(commands.cmd_array);
    }

    ParamInfoArray parameters;
    if (device_available_parameters(device, &parameters) == SDK_NO_ERROR) {
        printf("Device has parameters:\n");
        for (size_t i = 0; i < parameters.info_count; ++i) {
            ParameterInfo paramInfo = parameters.info_array[i];
            char paramName[32];
            parameter_to_string(paramInfo.parameter, paramName, 32);
            char access[32];
            parameter_access_to_string(paramInfo.access, access, 32);
        }
        free(parameters.info_array);
    }

    ChannelInfoArray channels;
    if (device_available_channels(device, &channels) == SDK_NO_ERROR) {
        printf("Device has channels:\n");
        for (size_t i = 0; i < channels.info_count; ++i) {
            ChannelInfo channelInfo = channels.info_array[i];
        }
        free(channels.info_array);
    }
}
private static void OnDeviceConnected(Device device)
{
    Console.WriteLine();
    Console.WriteLine("Device can execute:");
    foreach(var cmd in device.Commands)
    {
        Console.WriteLine($"    -{cmd.ToString()}");
    }
    Console.WriteLine();

    Console.WriteLine("Device has parameters:");
    foreach (var paraminfo in device.Parameters)
    {
        Console.WriteLine($"    -{paraminfo.Parameter} {{{paraminfo.Access}}}");
    }
    Console.WriteLine();
    
    Console.WriteLine("Device has channels:");
    foreach (var channel in device.Channels)
    {
                Console.WriteLine($"    -{channel.Name}");
    }
    Console.WriteLine();
}
    private void onDeviceConnected(Device device)
    {
        Parameter[] deviceParams = device.parameters();
        for (Parameter param : deviceParams)
        {
            String paramName = param.getName().toString();
            String accessMode = param.getAccess().toString();
        }
    
        Command[] deviceCommands = device.commands();
        for (Command cmd : deviceCommands)
        {
            String cmdName = cmd.toString();
        }
    
        ChannelInfo[] deviceChannels = device.channels();
        for (ChannelInfo channel : deviceChannels)
        {
            String channelName = channel.getName();
        }

        subscribeBatteryLevel(device);
    }

Acquiring signal data, battery charge etc.

All devices provides information through various channels. For example, to obtain information about signal use Signal Channel class. It requires Device object as constructor parameter

Device abstraction

Every physical device, Callibri or Brainbit, is represented in NeuroSDK as Device abstraction which has state and set of possible control actions. Device state (should not be confused with connection state - one of device parameters) is characterized by parameters of device , which could be read with special function call readParam. Control actions are presented as set of possible commands and set of writable parameters. Commands could be executed by execute function, parameters could be set with setParam function. Device also has separate functions to control connection state. You can get list of all supported parameters by calling parameters member function. To get list of supported commands call commands member function. More information about these functions available on appropriate Device pages for different languages.

namespace Neuro {

class Device final {
private:
    std::unique_ptr<DeviceImpl> mImpl;

public:
    ~Device();

    void connect();
    void disconnect();
    std::vector<ChannelInfo> channels() const;
    std::vector<Command> commands() const;
    std::vector<ParamPair> parameters() const;
    bool execute(Command);
    void setParamChangedCallback(std::function<void(Parameter)>);

    template <Parameter P>
    typename ParamValue<P>::Type readParam() const;

    template <Parameter P>
    bool setParam(typename ParamValue<P>::Type value);

private:
    Device(std::unique_ptr<DeviceImpl>);
};

bool checkHasChannel(const Device &, const ChannelInfo &);
bool checkHasCommand(const Device &, Command);
bool checkHasParameter(const Device &, Parameter);
std::size_t countChannelsWithType(const Device &, ChannelInfo::Type);
ParamAccess getParameterAccess(const Device &, Parameter);

}
typedef struct _Device Device;

int device_connect(Device *);
int device_disconnect(Device *);
void device_delete(Device *);
int device_available_channels(const Device *, ChannelInfoArray *);
int device_available_commands(const Device *, CommandArray *);
int device_available_parameters(const Device *, ParamInfoArray *);
int device_execute(Device *, Command); 
int device_subscribe_param_changed(Device*, void(*)(Device*, Parameter));
namespace Neuro
{
    public class Device
    {
        public event EventHandler<Parameter> ParameterChanged;

        public IEnumerable<ChannelInfo> Channels { get; }
        public IEnumerable<Command> Commands { get; }
        public IEnumerable<ParamInfo> Parameters { get; }

        public void Connect()
        {
            SdkError.ThrowIfError(device_connect(DevicePtr));
        }

        public void Disconnect();
        public void Execute(Command command);
        public T ReadParam<T>(Parameter parameter);
        public void SetParam<T>(Parameter parameter, T value);
    }
}
public class Device {
    public final SubscribersNotifier<ParameterName> parameterChanged;

    public native void connect();
    public native void disconnect();
    public native ChannelInfo[] channels();
    public native Command[] commands();
    public native Parameter[] parameters();
    public native boolean execute(Command cmd);
    public native <ParamType> ParamType readParam(ParameterName param);
    public native boolean setParam(ParameterName param, Object value);
}

Device commands

Whole list of device commands consists of:

1. StartSignal command
2. StopSignal command
3. StartResist command
4. StopResist command
5. StartMEMS command
6. StopMEMS command
7. StartRespiration command
8. StopRespiration command
9. StartStimulation command
10. EnableMotionAssistant command
11. FindMe command

Device parameters

Set of command for specific device depends on which modules does device have. This is also true for parameters set. All possible parameters are listed below:

1. Name,
2. State,
3. Address,
4. SerialNumber,
5. HardwareFilterState,
6. FirmwareMode,
7. SamplingFrequency,
8. Gain,
9. Offset,
10. ExternalSwitchState,
11. ADCInputState,
12. AccelerometerSens,
13. GyroscopeSens,
14. StimulatorState,
15. MotionAssistantState,
16. StimulatorParamPack,
17. MotionAssistantParamPack

Device could be configured by setting these parameters, but whether each parameter could be set or not is represented by parameter access modifier:

1. Read,
2. ReadWrite,
3. ReadNotify

Parameters could be readonly, for some of them device provides notification mechanism. Parameters with ReadWrite notifier could be set from user code.

Channel library

All NeuroMD devices provides biopotential signals and telemetry information through channels. Channel set of device depends on device modules. Information about channels could be obtained by calling channels method of device class.

SignalChannel

Built-in channel wich provides access to signal data received from device

private static void OnDeviceConnected(Device device)
{
     var frequency = device.ReadParam<SamplingFrequency>(Parameter.SamplingFrequency);
     if (frequency != SamplingFrequency.Hz125)
     {
         device.SetParam(Parameter.SamplingFrequency, SamplingFrequency.Hz125);
     }
     var signalChannel = new SignalChannel(device);
     signalChannel.LengthChanged += SignalChannel_LengthChanged;
     device.Execute(Command.StartSignal);
}

private static void SignalChannel_LengthChanged(object sender, int length)
{
     var duration = (double) (length) / 125;
     if (length > 125)
     { 
         var data = (sender as SignalChannel)?.ReadData(length - 125, 125);//read last second of signal on 125 Hz sampling frequency
     }
}
private void createSignalChannel(Device device){
    ChannelInfo[] deviceChannels = device.channels();
    for (ChannelInfo info : deviceChannels) { //creating spectrum channels for each signal channel present in device
         if (info.getType() == ChannelType.Signal) {
             final SignalChannel signalChannel = new SignalChannel(device, info);
             signalChannel.dataLengthChanged.subscribe(new INotificationCallback<Long>() {
                 @Override
                  public void onNotify(Object sender, Long length) {
                      long dataLength = 1024;
                      if (length > dataLength){
                          double[] signalData = signalChannel.readFast(length - dataLength, dataLength); //read last 1024 signal samples
                      }
                  }
            });
    }
}

BatteryChannel

Built-in channel containing battery charge data

private static void OnDeviceConnected(Device device)
{     
      var batteryChannel = new BatteryChannel(device);
      batteryChannel.LengthChanged += BatteryChannel_LengthChanged;
}

private static void BatteryChannel_LengthChanged(object sender, int length)
{
      var batteryLevel = (sender as BatteryChannel)?.ReadData(length - 1, 1)[0] ?? 0;
}
private void subscribeBatteryLevel(Device device){
    final BatteryChannel batteryChannel = new BatteryChannel(device);
    batteryChannel.dataLengthChanged.subscribe(new INotificationCallback<Long>() {
       @Override
       public void onNotify(Object sender, Long length) {
            int batteryLevel = batteryChannel.readData(length - 1, 1)[0];
       }
    });
}

ConnectionStatsChannel

ElectrodesStateChannel

MEMSChannel

OrientationChannel

RespirationChannel

SpectrumChannel

Programm channel providing spectrum data for specified signal channel

private void createSpectrumChannel(Device device){
    ChannelInfo[] deviceChannels = device.channels();
    for (ChannelInfo info : deviceChannels) { //creating spectrum channels for each signal channel present in device
         if (info.getType() == ChannelType.Signal) {
             SignalChannel signalChannel = new SignalChannel(device, info);
             final SpectrumChannel spectrumChannel = new SpectrumChannel(signalChannel);
             spectrumChannel.dataLengthChanged.subscribe(new INotificationCallback<Long>() {
                 @Override
                  public void onNotify(Object sender, Long length) {
                      long dataRangeLength = 1024;
                      if (length > dataRangeLength){
                          double[] spectrumData = spectrumChannel.readFast(length - dataRangeLength, dataRangeLength); //calculating spectrum for last 1024 signal samples
                      }
                  }
            });
    }
}

Base channel

All channel classes which device has are inherited from BaseChannel abstract class/interface. Custom channels (channels which do not present in device, also user-created) could be inherited from BaseChannel, but it is not necessary. Representing device information by channels gives easy way to process heterogeneous information in one manner. For example, it is easy to plot function of battery charge, biosignal, and connection statistics depend on same time scale.

namespace Neuro {

template <typename DataType>
class BaseChannel {
public:
    using data_container = std::vector<DataType>;
    using length_callback_t = std::function<void(data_length_t)>;
    using length_listener_ptr = ListenerPtr<void, data_length_t>;

    BaseChannel(ChannelInfo &&info) noexcept : mInfo(std::move(info)) {}
    BaseChannel(const ChannelInfo &info) : mInfo(info) {}
    virtual ~BaseChannel() = default;

    ChannelInfo& info() noexcept {
        return mInfo;
    }

    virtual length_listener_ptr subscribeLengthChanged(length_callback_t callback) noexcept = 0;
    virtual data_container readData(data_offset_t, data_length_t) const = 0;
    virtual data_length_t totalLength() const noexcept = 0;
    virtual data_length_t bufferSize() const noexcept = 0;
    virtual sampling_frequency_t samplingFrequency() const noexcept = 0;
    virtual void setSamplingFrequency(sampling_frequency_t) = 0;
    virtual std::weak_ptr<Device> underlyingDevice() const noexcept = 0;

protected:
    ChannelInfo mInfo;
};

}
public abstract class BaseChannel<SampleType> {
    public final SubscribersNotifier<Long> dataLengthChanged = new SubscribersNotifier<>();
    public abstract ChannelInfo info();
    public abstract SampleType[] readData(long offset, long length);
    public abstract long totalLength();
    public abstract long bufferSize();
    public abstract float samplingFrequency();
    public abstract void setSamplingFrequency(float frequency);
    public abstract Device underlyingDevice();
}

Devices versions

Callibri and Brainbit devices could have different sets of modules and functions depend on purpose of specific device.

Currently NeuroSDK supports three types of devices:

• Callibri (for electrophysiology);
• Callibri EMS;
• Brainbit.

In this section all possible compositions of modules or functions are listed

Callibri

Since Callibri device is positioned as universal biopotential measuring device it has modules to provide as much information as possible.

All posible modules of Callibri device are:

Base Callibri module

Base module is responsible for common Callibri device configuration and BLE configuration.

Module parameters:

1. Name;
2. State;
3. Address;
4. SerialNumber;
5. FirmwareMode;

Signal module

This module controls wide range of bio signals acquisition and its parameters such as sampling frequency, gain etc.

Module parameters:

1. HardwareFilterState;
2. SamplingFrequency;
3. Gain;
4. Offset;
5. ExternalSwitchState;
6. ADCInputState;

Respiration module

Respiration module controls special signal acquisition - respiration characteristic.

Module parameters:

1. ExternalSwitchState;

Micro electro-mechanical system (MEMS) module

This module is responsible for orientation and acceleration tracking of device.

Module parameters:

1. AccelerometerSens;
2. GyroscopeSens.

Most commonly Callibri device are supplied with all of these modules. Modules could be configured through device parameters. It is also possible to execute set of module-specific commands. List of supported commands and parameters could be acquired from device by appropriate calls to device library.

Callibri EMS

Callibri EMS device is positioned as smart electromyostimulation device and provides ability to stimulate muscles based on orientation and acceleration tracking data. It includes:

Base Callibri module

Base module is responsible for common Callibri device configuration and BLE configuration.

Module parameters:

1. Name;
2. State;
3. Address;
4. SerialNumber;
5. FirmwareMode;

Micro electro-mechanical system (MEMS) module

This module is responsible for orientation and acceleration tracking of device.

Module parameters:

1. AccelerometerSens;
2. GyroscopeSens;

Stimulation module

Special module for Callibri EMS which provides output with stimulation current pulses for miostimulation.

Module parameters:

1. StimulatorState;
2. MotionAssistantState;
3. StimulatorParamPack;
4. MotionAssistantParamPack.

Brainbit

Brainbit is more simplier than Callibri device and has only two modules

Base Brainbit module

Base module is responsible for connection establishing through BLE and for device state and mode control.

Module parameters:

1. Name;
2. State;
3. Address;

Signal module

Signal module is responsible for acquisition of EEG signal from 4 device electrodes and for measuring electrodes resistance.

Module parameters:

1. SamplingFrequency;
2. Gain;
3. Offset;

There are no modifications for Brainbit device, so basically it has fixed set of commands and parameters. Anyway, we are moving forward and add new post analytic functions for Brainbit data.